Guangzhou SKY Sports Facilities Co.,Ltd
Tel: +86-02037508090E-mail: sales@gzskysports.com
Home > Knowledge > Content
What are the common problems that occur when soccer balls are used in artificial grass balls?(Two)
- Nov 15, 2017 -

First, artificial grass venues uneven interface, the gap is too large?

1, the basis of the site did not press the standard requirements, uneven, resulting in uneven interface;

2, artificial turf seams poor connection caused by uneven;

3, artificial turf production process and quality problems caused by deformation, can not straighten, resulting in cracks;

4, lack of professional construction experience, lack of special construction tools and qualified skilled technicians.

Second, the venue pan-black, messy surface?

1, the site used too much rubber or unqualified quality, resulting in large areas of black pollution;

2, the emergence of artificial turf multi-point area off, leaving only filler;

3, lack of professional construction experience, the lack of special tools and qualified skilled technicians;

4, lack of necessary maintenance after completion of construction;

Third, the venue surface layer knot?

1, the foundation is not flat, easy to stagnant water, easy to dipping knot;

2, the quartz sand and other accessories used too thin or uneven thickness;

3, the rubber particles used, quartz sand and other accessories too much impurities or mud content larger;

4, poor quality of artificial turf, there is no flexibility and easy to hair loss, and the lack of necessary maintenance;

Fourth, the uneven surface of the venue, uneven artificial sparse uneven?

1, the basis of artificial turf ground is not flat,

2, uneven fill fill materials; and part of the grass in the construction process was covered by filler material;

3, Artificial turf production technology is not professional, there is a big grass-high error;

4, lack of professional construction experience, lack of special construction tools and qualified skilled technicians.

Fifth, the site water?

1, the basic rugged, low water easy to place;

2, the lack of maintenance site compaction, poor drainage;

3, local grass fiber wear powerful, open into potholes;

4, filler material is not reasonable.